Anycast M9 Plus: 2018

INSTALLATION / PEMASANGAN

INSTALLATION
1: Using the supplied WiFi cable : Connect the micro USB head to AnyCast & then plug the USB cable head into a USB power supply or charger (5V 1A).
2: Plug the AnyCast into the HDMI port of your TV and switch to the right input source (HDMI input).
NOTE :
- 5V USB power supply or charger with minimum 1A current is required for stable wifi connection.
- make sure your tv/screen support 1080p resolution.
-You can reset Anycast by pressing & holding the button on Anycast for 10 seconds.

PEMASANGAN

1: Dengan kabel WiFi yg disediakan : Pasang kepala micro USB ke AnyCast & kepala USB ke sumber kuasa/charger USB.

2: Pasang AnyCast ke port HDMI TV anda dan pilih input HDMI yang betul (input HDMI).

NOTA:
-Sumber kuasa atau charger USB 5V dengan arus minimum 1A diperlukan untuk sambungan wifi yg stabil.
-pastian tv/skrin anda support resolusi 1080p

-Untuk reset Anycast, tekan & tahan butang yg ada di Anycast selama 10 saat sehingga ia restart.

ANDROID

ANDROID
There are 3 ways for android: Miracast mode, Google Home, & DLNA mode. We recommend using Miracast mode.

1. MIRACAST MODE (recommended).
Step 1: Turn on your device’s wifi – but don’t connect it to Anycast.
Step 2: Open Miracast function on your Android.

•Miracast function may has different name depending on your phone model such as : Screen mirroring/ Wireless Display/Miracast/Smart View/PlayTo/Multi Screen/Quick Connect/HTC Connect etc.
•It usually found under Quick Setting (drop down menu) or Wireless & Networks or Display or More setting. You can see some samples here: CLICK HERE
•If you did not find it, install Miracast shortcut app from Playstore like ‘Miracast Screen Mirroring Shortcut’ or ‘Wifi Display (Miracast)’. Open it & it will bring you to Miracast function.

Step 3: Enable Miracast function & let it search for Anycast for a while. When found, choose your Anycast device to start.

•If no device found, please turn off Anycast & your device’s Wifi for a minute & try again. Make sure Miracast function is enabled & your device’s wifi is on.
•Phone with minimum 1GB of RAM is recommended.

Video example using Quick Setting (drop down menu) > Smart View :

Video example using Wifi Display (Miracast) app from Playstore :

Video example using phone menu (Zenfone 3) : Setting > Network & internet > More > PlayTo.

______________________________

2. GOOGLE HOME (Wifi router is required).

Step 1: Go to your device’s wifi, find “Yehua-xxxxxx”, input password “12345678” and connect.

Step 2: Open your internet browser, enter 192.168.203.1 and go. Then click “Internet”.

Step 3: Choose your wifi. Enter your wifi password & click OK.

Your wifi router’s name will be displayed on screen with successful connection.

NOTE: Anycast wifi is not available when it connected to wifi router. If you want to go to Anycast setting page again, enter IP address that appear on the tv screen into your internet browser.

Step 4: Connect your phone’s wifi to the same wifi router used in Step 3.

Step 5: Install Google Home app from Play. Open it & select the option button (3 lines on the top left in the app). Then select “Cast screen/audio”. Make sure your phone & Anycast are connected to the same wifi router.

______________________________

3. DLNA MODE (Wifi router is required. Cast function is limited).
Step 1: Go to your device’s wifi, find “Yehua-xxxxxx”, input password “12345678” and connect.

Step 2: Open your internet browser, enter 192.168.203.1 and go. Then click “Internet”.

Step 3: Choose your wifi. Enter your wifi password & click OK.

Your wifi router’s name will be displayed on screen with successful connection:

NOTE: Anycast wifi is not available when it connected to wifi router. If you want to go to Anycast setting page again, enter IP address that appear on the tv screen into your internet browser.

Step 4: Connect your phone's wifi to the same wifi router used in Step 3.
Step 5: Install DLNA sharing app from Play Store like “iMediaShare” & follow the instruction. Make sure your phone & Anycast are connected to the same wifi router.

iPHONE/iPAD/MAC (AIRPLAY)

iPHONE/iPAD/MAC (AIRPLAY/SCREEN MIRRORING).

Step 1: Go to your device’s wifi, find “Yehua-xxxxxx”, input password “12345678” and connect.
Step 2: Turn on Airplay or Svreen Mirroring and select your AnyCast to start.

iOS:

Mac:

Video example on iPhone :

WINDOWS

•Using Google Chrome: (Wifi router is required).

Step 1: Go to your device’s wifi, find “Yehua-xxxxxx”, input password “12345678” and connect.

Step 2: Open your internet browser, enter 192.168.49.1 and go. Then click “WIFI AP”.

Step 3: Click “Scan” & choose your wifi. Enter your wifi password & Connect. Anycast will restart & connect to your wifi router.

Step 4: Connect your PC’s wifi to the same wifi router used in Step 3.

Step 5: Open Google Chrome & select the option button (3 dots on the top right). Then select “Cast”. Make sure your PC & Anycast are connected to the same wifi router.

•Windows 10: launch the “Windows Start Menu > Settings > Connected devices > Add a printer or scanner”, and then search for AnyCast & select it to start mirror.

•Windows 8.1: launch the “Windows Start Menu > Settings > PC and devices > Devices > Add a device”, and then search AnyCast & select it to start mirror.